The first thing you want to do is take your patterned paper and trace the clipboard on the back so you can cut it out. Use a heavy duty glue and glue onto the front of the clipboard. I used Scotch Quick-Dry Adhesive. I also did this on some scrap paper so when I smoothed out the glue it didn't get all over the place.
While I was waiting for the glue to dry, I got to work on the blocks.... this is where that chipboard that comes in our ups orders that we all hoard is gonna be used. I marked it every 3 inches on the top and on the side....I marked them so I would know which ones not to cut out. Cut around the 1-6...
This is what it will look like after you cut it out...
Now, score your box lines and fold up into a cube. I used that heavy duty glue and glued the ends together with strips of cardstock...
Okay...do that twice to make 2 cubes. Next I took my Club Cracker box and cut in right in half length wise....
Now, I had to cut the box again, it was the exact size of the clipboard but I wanted my cubes to be a bit snug...
Put your cubes in these pieces and to see where you need to reattach the pieces...
I used my heavy duty glue again and glued mine to the very bottom of the clipboard. You can glue yours anywhere you want. I put mine where I did because I didn't have enough ribbon to make mine hang. If you glue yours up a bit higher you can use a matching ribbon and clip it under the clip. Mine at the bottom stands by itself. For the cubes, I had to cut squares and attach with adhesive to all the sides. The 12x12 cardstock when folded around was a wee bit too small. I inked the edges to give it a polished look....
Now you are ready to decorate any way you like. The numbers for the cubes are: 0,1,24,7,8 and on the other one: 0,1,2,3,5,6(which doubles for 9)
